Leaf Spring Hangers

Replacement leaf spring hangers for heavy duty trucks and trailers are designed specifically for your make, model and year of your truck. High quality direct OEM replacement suspension parts.

Found 159 Matching Products
Filter the list of Matching Products by selecting any of these options:
  1. Leaf Spring Hanger
  2. Equalizer Hanger
  3. Shackle Hanger
  1. Hanger Mount Kit
  2. Equalizer and Hanger
  3. Eye Cast
  1. Hanger Frame
  1. Front
  2. Front and Rear
  1. Rear
  2. Center
  1. Front of Front
  2. Front of Rear
  1. Rear of Front
  2. Rear of Rear
  1. Autocar
  2. Ford
  3. Freightliner
  1. Fruehauf
  2. Great Dane
  3. Hendrickson
  1. Hutch
  2. International
  3. Kenworth
  1. Mack
  2. Navistar
  3. Neway
  1. Oshkosh
  2. Peterbilt
  3. Reyco
  1. Volvo
  2. Volvo-White
  3. Western Star
SKU 31124-001L

Leaf spring hanger for Hendrickson U, UE, RU, RUE, RT, RTE Series suspensions with .85 inch offset. Uses M5224 shackle pin.   Details

1 In Stock as of October 29, 2020 7:19 PM EST.
  • Application:Hendrickson
  • Automann Number:M906
  • Euclid Number:E2611
  • Hendrickson Number:311241, 311241001
  • Meritor Number:R302611
  • MPN: 31124-001L
SKU 31128-001L

Leaf spring hanger for Hendrickson U-UE, RU, RUE, RT, RTE Series suspensions with .91 inch offset. #1 web style. Uses M4962 shackle bolt.   Details

1 In Stock as of October 29, 2020 7:19 PM EST.
  • Application:Hendrickson
  • Automann Number:M900
  • Batco Number:09-5908
  • Dayton Number:338-107
  • Euclid Number:E2609
  • Flagg Number:E327-50
  • Gaumers Number:13314
  • Hendrickson Number:31128001 / 002 / 003, Cast# 31026, 311281001
  • Meritor Number:R302609
  • MPN: 31128-001L
SKU 338-1100

Leaf spring hanger for Fruehauf F-Series and Great Dane R-Series trailers with standard undermount. Fits front spring applications.   Details

5 In Stock as of October 29, 2020 7:19 PM EST.
  • Application:Fruehauf
  • Location:Front
  • Automann Number:M1620
  • Batco Number:09-2006
  • Dayton Number:338-1100
  • Euclid Number:E2826
  • Flagg Number:FR246
  • UPC: 889626100932
  • MPN: 338-1100
SKU 338-1101

Leaf spring hanger for Fruehauf trailer F-Series suspensions. The center hanger, standard undermount. Replaces Fruehauf UXA000034000.   Details

12 In Stock as of October 29, 2020 7:18 PM EST.
  • Application:Fruehauf
  • Location:Center
  • Automann Number:M6122
  • Batco Number:09-2008
  • Dayton Number:338-1101
  • Euclid Number:E2827
  • Flagg Number:FR273
  • Fruehauf Number:UXA000034000
  • Meritor Number:R302827
  • Midland Number:CS70427B
  • Note:F-Series standard undermount
  • MPN: 338-1101
SKU 338-1104

Equalizer hanger for Fruehauf F-Series suspensions. Center hanger, undermount, wide base and replaces Fruehauf UCE007746001.   Details

2 In Stock as of October 29, 2020 7:18 PM EST.
  • Application:Fruehauf
  • Location:Center
  • Automann Number:M6114
  • Batco Number:09-2001
  • Dayton Number:338-1104
  • Euclid Number:E2823
  • Flagg Number:FR242
  • Fruehauf Number:UCE007746001
  • Note:F-Series undermount wide base
  • MPN: 338-1104
SKU 338-1411

Leaf spring equalizer hanger for Reyco Transpro 86, 88 and 88HD suspensions. Fits center fabricated flangemount applications.   Details

2 In Stock as of October 29, 2020 7:18 PM EST.
  • Application:Reyco
  • Location:Center
  • Automann Number:M12086
  • Batco Number:09-2878
  • Dayton Number:338-1441
  • Euclid Number:E4809
  • Flagg Number:TP131
  • Gaumers Number:31200
  • Meritor Number:R304809
  • Reyco Number:031200, 040100
  • Transpro Number:0312-00, 0401-00
  • MPN: 338-1411
SKU 338-1487

Leaf spring hanger 338-1487 for Hutch suspensions. Fits center applications. Replaces Hutch number 1618501.   Details

1 In Stock as of October 29, 2020 7:19 PM EST.
  • Application:Hutch
  • Location:Center
  • Automann Number:M16851
  • Batco Number:09-3087
  • Dayton Number:338-1487
  • Hutch Number:1618501, 16185-01
  • UPC: 889626103858
  • MPN: 338-1487
SKU 338-188

Leaf spring hanger for Reyco T5425. Fits the left hand for front leaf spring applications. 21B, flangemount.   Details

1 In Stock as of October 29, 2020 7:20 PM EST.
  • Application:Reyco
  • Location:Front
  • Automann Number:M8228
  • Batco Number:09-2853
  • Dayton Number:338-188
  • Euclid Number:E2880
  • Flagg Number:R221
  • Meritor Number:R302880
  • Reyco Number:T5425
  • Note:Left hand.
  • UPC: 889626109577
  • MPN: 338-188
SKU 338-1897

Leaf spring hanger 338-1897 for Volvo-White VHD, VM, VN, VT suspensions. Fits rear of front spring applications.   Details

6 In Stock as of October 29, 2020 7:20 PM EST.
  • Application:Volvo-White
  • Location:Rear of Front
  • Automann Number:M1659
  • Dayton Number:338-1897
  • Volvo / White Number:8071790, 8071791
  • Note:Use with MVT11 seal, MTB180 bushing and M1291 side bar
  • MPN: 338-1897
SKU 338-192

Leaf spring hanger for Reyco 21B trailers. Fits center spring applications. Drilled, flangemount, 42 to 49 inch. Replaces Reyco number T5426.   Details

5 In Stock as of October 29, 2020 7:20 PM EST.
  • Application:Reyco
  • Location:Center
  • Automann Number:M8230
  • Batco Number:09-2855
  • BWP Number:M-3419
  • Dayton Number:338-192
  • Euclid Number:E2881
  • Flagg Number:R222
  • Leland Number:SC1698
  • Meritor Number:R302881
  • Reyco Number:T5426, T-5426
  • MPN: 338-192
SKU 338-194

Leaf spring hanger for Reyco 21B cast and fabricated and 25 series trailers. Fits the left hand for rear leaf spring applications, flangemount.   Details

5 In Stock as of October 29, 2020 7:20 PM EST.
  • Application:Reyco
  • Location:Rear
  • Automann Number:M8234
  • Batco Number:09-2859
  • Dayton Number:338-194
  • Euclid Number:E2883
  • Flagg Number:R223
  • Meritor Number:R302883
  • Reyco Number:T5429, T-5429
  • Note:Left hand.
  • UPC: 889626109522
  • MPN: 338-194
SKU 338-1942

Leaf spring hanger for Freightliner MB/FL series, Actera trucks. Fits the left hand for front of rear leaf spring applications.   Details

1 In Stock as of October 29, 2020 7:19 PM EST.
  • Application:Freightliner
  • Location:Front of Rear
  • Automann Number:M1705
  • Dayton Number:338-1942
  • Freightliner Number:6803200275, 6803250001 Cast#
  • Note:Fits Left Hand. MB/FL series, Actera.
  • UPC: 889626100451
  • MPN: 338-1942

Semi-Truck and Trailer Leaf Spring Hangers

Leaf spring hangers on heavy-duty trucks and trailers play a critical role in the function of the suspension systems. The leaf spring hangers act as frame attachment points for the leaf springs and leaf spring shackles on heavy-duty trucks. On heavy-duty trailers, the hangers will retain the springs with rebound bolts and allow them to change their length by sliding along wear pad areas designed into the hanger since most heavy-duty trailer suspensions use slipper springs. Carrying heavy loads over long distances takes its toll on the entire suspension system, but the spring hangers can often be overlooked until they fail or have so much wear that they are causing problems. Since spring hangers on heavy-duty vehicles experience high amounts of wear, it is far more common to replace while changing leaf springs or performing other suspension repairs.

Heavy Duty Truck Leaf Spring hangers

Most Heavy-duty trucks use hardened steel pins to attach the leaf springs to the hangers and shackles. These spring pins are greaseable using zircs in the ends of the pins, and the pins may be smooth sided or threaded. The main point of wear on leaf spring hangers is at the surfaces that the spring pin and the hanger interact. As the suspension moves the pins should glide on a layer of grease but if maintenance is not kept up the grease layer may not be adequate, and the pins will begin to wear into the hanger or the spring hanger bushings. Many hangers will have a replaceable bi-metal bushing like heavy-duty leaf springs, but on some hangers, the wear may be so severe that the bushing is worn through. When a bushing is worn through the hanger must be replaced. Hangers that do not have bushings are more susceptible to spring pin wear because the grease layer is the only protection that the hanger has from wear. Wear in the hangers will weaken the structure of the hanger and will leave excessive play in the spring pin and hanger. This can allow the suspension to move and cause alignment issues with abnormal tire wear.

leaf spring hanger

Other trucks may use rubber hanger and leaf spring bushings. Rubber can be smoother riding compared to brass bushings, but it is susceptible to dry rot and damage from oil contamination. Rubber bushings will have an inner sleeve, or a solid steel pin vulcanized to the center. Both the steel sleeve and the built- in pin may experience wear and tear over time and need to be replaced. Allowing a rubber leaf spring hanger bushing to wear excessively may require the entire hanger to be replaced if it is damaged.

leaf spring bushings

How to Identify Leaf Spring Hangers?

Leaf spring hangers on heavy-duty trucks are bolted on or riveted to the frame from the factory. A bolted-on hanger can be unbolted and replaced where a riveted hanger will need to have the rivets drilled for removal and replaced with bolts. When replacing heavy-duty truck hangers, it is essential to correctly identify the replacement to ensure that the installation goes smoothly. When looking for replacement hangers, several areas should be considered to confirm the replacement you order will fit.

casting numbers

Many manufacturers will include an identifying number that is cast into the hanger when it is produced. If a clear casting number is present, this can be useful in the search for a replacement. Measurements should still be taken to verify that replacements for that casting match.

leaf spring hanger casting numbers

Measuring the hanger

Familiarize yourself with your truck and the suspension system that it uses to make finding a replacement easier. Taking measurements of the hanger and knowing the suspension system the hanger is used on can make finding a replacement much more straightforward, even without any part numbers.

leaf spring hanger measurements
  • Mounting hole spacing and size ā€“ Measuring center to center on all mounting holes, take note of the distance between them vertically and horizontally. Due to space restrictions on truck frames, holes will not be evenly spaced. There will be holes on the face of the frame, but there may also be a flange that sits on the bottom of the frame for support that can also have mounting holes.
  • Spring pinhole size- Leaf spring hangers may directly interact with the spring pin, or they may use a bushing. The spring pin size or the size of the bushing will be essential to make sure that the hanger is compatible with the spring and pin.

OEM part numbers from dealer sources

In some cases where the truck is being used and not available for identification and measurement, it may be necessary to call your dealer and get replacement part numbers for the hanger. Most OEM numbers can be cross-referenced to aftermarket replacements even when the dealer may have discontinued the part.

Heavy-Duty Trailer Leaf spring hangers are made from cast steel or fabricated from heavy gauge steel plate, and they will be welded to the frame with very few trailer hangers being bolt-on. Trailer suspensions will typically use slipper type leaf springs, so the hangers on trailers differ from truck hangers. The leaf spring hangers on the trailer must retain the springs and allow them to slide along the hanger as they change length. The action of steel leaf springs sliding over the wear pad areas of the hanger will slowly cause wear of both the spring and hanger. As these items wear, they will need to be replaced.

Different Types of Leaf Spring Hangers

When choosing a trailer leaf spring hanger, it is essential to know what suspension system your trailer is using and the mounting style of the hanger. Trailer hangers can have three different frame mounting styles:


Hangers that are under-mounted will have a flat plate across the top that will rest against the bottom of the trailer frame where they will be welded. They are called undermount since they are entirely under the frame.

under mount leaf spring hanger

Straddle mount

Spring hangers that straddle mount will straddle the frame and be welded on the inside and outside of the frame. In some applications you will be able to move the hanger up and down the frame to adjust the final mounting height.

straddle mount leaf spring hanger

Flange mount

Flange mount hangers are a mix of under mount and side mount and have an ā€œLā€ shaped mounting plate. The mounting plate will wrap around the side of the frame and install on the side and the bottom of the frame. Flange mount hangers can be bolt-on, weld-on, or a mixture of both.

flange mount leaf spring hanger

It will also be essential to take some measurements when replacing trailer leaf spring hangers and compare them with the measurements that we list on our website. Simple hangers may only have a few sizes but with more complicated spring hangers the number of measurements listed will increase. Just like truck hangers, using OEM part numbers can also be helpful when looking for replacement hangers as well as casting numbers on the hangers themselves. If you need help finding replacement hangers for your HD truck or trailer, please give us a call at 1-800-358-4751 or reach out to us at TruckSpring.com

Need Help Finding the Right Product?

Our Michigan Based Parts Experts Can Help. Call for immediate assistance.

Please Wait...