Firestone Ride-Rite kit #2264 is for trucks with a 4" Lift where the distance between the frame and the spring pack is increased, ex. arched springs, etc. This does not include body or block lifts. If you are unsure on which kit to use please contact us at 1-800-358-4751 or Firestone tech at 1-800-888-0650.

Each kit is complete with air springs, air lines, inflation valves, fittings, brackets, mounting hardware, and detailed installation manual.

Everything is included for a quick, easy installation. Brackets, air springs, hardware, air line, and separate valves for manual inflation.

Firestone has made a commitment to provide the customer with premium air helper spring kits. Ride-Rite air helper springs have become synonymous with quality, durability and with customer support truly second to none.

Each application is specifically designed to maximize the safe load carrying capacity, stability, and ride quality of the vehicle. Ride-Rite air helper springs utilize a pair of convoluted air springs which can be adjusted for changing loads. These air springs are capable of 3,200 - 5,000 lbs. of load leveling capacity .

Ride-Rite air helper springs enhance the ride by reducing inter-leaf friction. Please remember that air springs do not increase the load-carrying capacity of your vehicle.

Ride-Rite Air Helper Springs will:

• Keep the vehicle level - improve steering control and braking effectiveness, level headlight beams and reduce tire wear.
  
• Level off-center loads - individual inflation valves allow for adjustment side-to-side.
  
• Reduce suspension fatigue - keep leaf springs from permanent sagging under repeated or constant load.
• Improve the ride - allowing the air springs to be matched to the load.
  
• Reduce bottoming out - protective air cushion softens contact between the axle and frame.
  
• Increase vehicle stability - absorbing road shock providing ideal ride conditions for passengers and load.

Kit Contents:

• Air Springs
• Air Line
• Fasteners
• Detailed Instructions
• Upper and Lower brackets
• Inflation valves (manual inflation)
• Push-to-Connect air fittings

Quality Standards:

• Over 1 million cycle life test
• Each kit is weighed to ensure component count
• ISO Certified
• Each air spring pressure tested before leaving the factory

The image above is a generic image and may not represent how this specific Ride-Rite kit mounts. To see exactly how this kit mounts, please view the instructions below. Thank you!