TruckSpring Times

Truck & Trailer Parts - News & Information

SumoSprings for Lifted Jeep Wrangler and Cherokee

Do you have a lifted Jeep XJ or XK and want to maximize your load carrying ability and provide stability? SuperSprings International now has your answer in the SumoSpring 403 and the 404 series spring.
 
 

SumoSprings are designed to stabilize sway and improve overall driver control and comfort while enhancing load carrying ability. The one-piece, “Solo” design attaches on only one side of the vehicles suspension for easy installation.

Manufactured from proprietary closed microcellular urethane, SumoSprings will compress up to 80% of their original height with full memory rebound.  Easier initial compression will allow softer engagement, greater resistance with heavier loads equaling a progressive load control.
 
The airless SumoSpring will never leak and cause a loss of performance and are highly resistant to oils, salts and UV ray making them the perfect solution for off road or wet environments. And best of all, they are 100% maintenance free and made in the USA.
 



SSR-403-40 Jeep Cherokee XJ (1984-2001) with a 2 inch rear lift
SSR-404-40 Jeep Cherokee XJ (1984-2001) with a 4 inch rear lift
SSF-403-54 Jeep Wrangler XK (2007-2016) with a 2 inch front lift 
SSF-404-54 Jeep Wrangler XK (2007-2016) with a 4 inch front lift

So get a set of SumoSprings for your Lifted Jeep and “fit-it-and-forget-it”.  Contact one of our suspension experts at 1-800-385-4751 or order online at TruckSpring.com.

New Product Alert: Super Sways Stops SSS-2 Helps Reduce Sway On Trucks With Air Bags Installed.

SuperSprings has discontinued SuperSway-Stops part number SSS-1 and replaced it with a new and improved kit, Supersprings part SSS-2.

supersprings anti-sway control
Super Sway Stops kit SSS-2 will fit all of the previous applications covered by the SSS-1 with the inclusion of the Ford F-450 and F-550 trucks. The new SSS-2 kit has upgraded hardware to accommodate the added weight of the Ford F-450 and F-550.

 

SSS-2 SuperSway-Stops fit the following trucks:

1997-2014 Ford F-250 Pickups with factory overload springs above the spring pack
1997-2014 Ford F-350 Pickups with factory overload springs above the spring pack
2008-2014 Ford F-450 SuperDuty Pickup with factory overload springs above the spring pack
2000-2014 Ford F-450 & F-550 Cab and Chassis pickups with factory overload springs above the spring pack
2006-2013 Dodge RAM 2500 with factory overload springs above the spring pack
2006-2014 Dodge RAM 3500 with factory overload springs above the spring pack

supersprings supersway stops

How SuperSway Stops Work:

Super Sway stops are designed to work with trucks that have air bags or air springs installed. If you have airbags installed on your truck with factory overloads, you may have noticed that once you inflate your airbags, your overload springs are no longer performing as designed. When your air bags are inflated, additional separation is created between your factory overload springs and the frame-mounted snubber or contact plate.

The increase in the gap prevents your overload springs from contacting the snubber. This loss of contact prevents the overload springs from working as designed. The SSS-2 Super Sway Stop kit is designed to eliminate this gap and allow the overload springs to work in conjunction with your air bags. This will help maintain vehicle stability and reduce body-roll and sway.

What's Included in SuperSway Stops Kit SSS-2

4 SuperSway Stops (2 for each side)
Installation Instructions (Simple Bolt-on Installation)


Super Sway Stop kit SSS-2 is a simple bolt-on installation and is proudly made in the U.S.A by SuperSprings.