Receiver Adapter | Draw Tite | Reduces 2 Inch to 1-1/4 Inch, 7 Inch long

SKU 80300

Draw Tite hitch receiver adapter reduces a 2 inch receiver to 1-1/4 inch. 7 inches long from pin hole to pin hole. Allows you to carry a bike rack or tow a light trailer that has a 1-1/4 inch shank with your 2 inch hitch receiver. Requires 5/8 inch pin for 2 inch receiver and a 1/2 inch pin for 1-1/4 inch receiver, sold separately.

Read Reviews

$47.95

Qty Spin Up Spin Down * *

Product Specifications

Max Gross Trailer Weight:3,500 lbs.
Length:7 inches
FinishBlack Powder Coat
Note:Requires 5/8 inch pin for 2 inch receiver and a 1/2 inch pin for 1-1/4 inch receiver. Hitch pins and clips sold separately.

Typically ships in 2-3 weeks.

Related Products

$10.37

$6.88

Hitch Pin And Clip | 1/2 Inch | Class I/II

Typically ships in 2-3 weeks.

$12.09

$8.02

Hitch Pin And Clip | 5/8 Inch | Class III/IV

Typically ships in 2-3 weeks.

Product Specs for Draw-Tite 80300

Max Gross Trailer Weight:3,500 lbs.
Length:7 inches
FinishBlack Powder Coat
Note:Requires 5/8 inch pin for 2 inch receiver and a 1/2 inch pin for 1-1/4 inch receiver. Hitch pins and clips sold separately.
UPC: 058914803002
MPN: 80300

Ask an Expert

customer service Our Michigan based experts can help.

1.800.358.4751
Email

Hours

M-F 7:00AM - 11:00PM EST

Sat 8:00AM - 1:00PM EST

Draw-Tite 80300 Details

Draw Tite hitch adapters are constructed of the highest quality steel. Each adapter features a black E-Coat finish for long lasting durability.

Features:

Reduces a 2 inch receiver to a 1-1/4 inch receiver
7 inch length (from pin hole to pin hole)
11-1/2 inch total length

Maximum Trailer Weight is the lowest of:

50% of the hitches listed rating.
Manufacturer's vehicle tow capacity.
3500 lbs.

Maximum Tongue Weight is the lowest of:

50% of the hitches listed tongue capacity.
300 lbs

Customer Q&A - Draw-Tite 80300

Ask A Question

Draw-Tite

Draw-tite is the leader in trailer hitches, ball mounts, and trailer towing products. Over fifty years and millions of trailer hitches later, Draw-tite’s 500 dedicated employees put the same care and patience into every hitch they build today as Bill Whichello did fifty years ago. Draw-Tite also make use of technologically advanced equipment and the most experience in the industry to meet the challenges of tow vehicles. The basis of Draw-tites continued success is that Draw-Tite trailer hitches are custom fit for each vehicle. This makes them easy to install. A dealer simply bolts one piece, welded trailer hitches to the vehicle frame. Most installations take 30 minutes or less.

Draw-Tite Warranty

1 Year Limited Warranty

All Draw-Tite products have at least a 1 Year Limited Warranty.

Some products have longer warranty coverage periods. This coverage is item by item and you should review the warranty information included.

What the warranty does not cover

Normal wear and tear over time, damage from abuse or neglect, and damage resulting from accidents is not covered. Improper installation including welding will void any warranty.

Any alteration of products beyond the included installation instructions will void the warranty.

You can view the full details of Draw-Tite’s warranty here.