Brake Camshaft | 11-1/2 Inch | Right Hand

SKU 04-371151

$27.93
 
3 In Stock as of 9/27/2020 12:10:20 AM EST.

S Cam air brake camshaft 04-371151 for a 16-1/2 inch brake, Eaton drive axle. 1-1/2 inch - 10 spline, 11-1/2 inch effective length, 1-1/2 inch journal, 1-3/8 inch head, right hand rotation.

Related Products

Product Specs for 04-371151

  • Axle Type:Drive
  • Spline Diameter:1-1/2 inch
  • Spline Teeth:10
  • Length (A): 11-1/2 inch
  • Head Size:1-3/8 inch
  • Rotation:Right Hand
  • Journal:1-1/2 inch
  • Application:Eaton 16-1/2 inch
  • Camshaft Repair Kit: 08-135100
  • Cross References:M-1571R, 70307, E-1775, L-1202, R607015, CS41761, 18-738
  • Automann Number:120.101116.02
  • Euclid Number:E-1775
  • Sirco Number:C775R
  • MPN: 04-371151
Ask an Expert

customer service Our Michigan based experts can help.

1.800.358.4751
Email
Hours
M-F 7:00AM - 11:00PM EST
Sat 8:00AM - 1:00PM EST

04-371151 Details

Tough, Durable and Reliable Camshafts

The brake camshaft (or S Cam) is at the heart of the air brake system and it must be able to withstand the rigorous demands of heavy duty brakes. State-of-the-art technology is utilized to manufacture our brake camshafts. With CNC turret lathes and computer controlled heat treating equipment, these S Cams are made tough, durable and reliable.

State-of-the-Art Camshaft Manufacturing Process

Creating a quality brake camshaft requires forging the head of the cam to the correct specifications. A camshaft with an incorrectly manufactured, worn or damaged head can cause erratic brake operation.

Therefore it is very important that our camshafts are machined to precise measurements on computer controlled turret lathes. This method ensures both the accurate sizing of journal bearings and the correct concentricity between the cam head and cam shaft.

Further increasing the quality of these camshafts is the method in which the spline teeth are cut. Many manufactures broach the teeth from the shaft, but this can make for a weaker spline tooth. Our camshafts have their shaft splines are machine rolled for the greatest amount of strength and dimensional integrity.

To prevent the kind of wear and damage caused by normal use, these S Cams are heat treated for maximum endurance. The critical areas of the camshaft, such as the cam head and the spline teeth are induction hardened to prevent the premature failure due to accelerated wear.

Quality Camshafts Tested for Excellence

Finally, to ensure the quality of the camshaft, each stage of the manufacturing process utilizes statistical process control to guarantee excellence at any step in the process, on every part made.

Customer Q&A - Multiple Heavy Duty Manufacturers 04-371151


I have a maintaince free s cam on 2012 frtlnr can I take the plug I c on the tube or bracket my cam shaft is in and start lubricating the shaft to prevent shaft from getting hard to rotate properly. All 4 shafts on rear of tractor r this type .

Asked
You can but you may blow out the seals on the ends. If it is hard to rotate, you may want to consider replacing the cam shaft. Without seeing what you are working on, it is difficult to recommend the proper repair steps to take.


I have a maintaince free s cam on 2012 frtlnr can I take the plug I c on the tube or bracket my cam shaft is in and start lubricating the shaft to prevent shaft from getting hard to rotate properly. All 4 shafts on rear of tractor r this type .

Asked
Yes, if its a threaded plug you can. It may blow out the seals on the end of the cam though. If they are hard to move, you may want to consider replacing the cam shafts. Without seeing them, its hard to recommend a solution.


Multiple Heavy Duty Manufacturers

At Truckspring.com we buy our heavy duty truck parts from several brand name manufacturers to bring you the highest quality parts at the lowest possible prices.

Because we work with so many suppliers, the manufacturer of this particular product may vary. However, you can be certain that Truckspring.com sells only the finest products. We only stock OEM quality or better truck parts. We do not deal in cheap or shoddy made knock offs.

If you would like to enquire as to the manufacturer of a specific part, please call our expert staff at 1-800-358-4751 or 989-755-0561.

Heavy Duty Truck Parts Warranty

1 Year Limited Warranty

On all HD products. We warranty our HD products against defects in workmanship or material.

What the warranty does not cover

Damage from accidents, corrosion, improper installation, incorrect applications, overloading, and custom applications that are not specified under the OEM cross references. This warranty does not cover loss of freight, loss of profit, equipment, or personal downtime.

How to get service

If a Heavy Duty Truck Part fails as a result from a manufacturer defect, contact us at Michigan Truck Spring for support. You can contact us by phone at 1-800-358-4751 or by using our contact form.

People Who Bought This Also Bought

Need Help Finding the Right Product?

Our Michigan Based Parts Experts Can Help. Call for immediate assistance.

Please Wait...