Rear CV Drive Shaft | Rough Country | Jeep TJ Wrangler

SKU RC5075.1A

$299.95 Free Ship!
Check if this fits your vehicle.
Spin UpSpin Down
 

Product Specifications

  • Collapsed Length (IN)14.25
  • Extended Length (IN)17.75
  • Typically ships in 1 business day.

Product Specs for Rough Country 5075.1A

  • Collapsed Length (IN)14.25
  • Extended Length (IN)17.75
  • UPC: 840269981258
  • MPN: 5075.1A
Ask an Expert

customer service Our Michigan based experts can help.

1-800-358-4751(toll-free, US & Canada) 1-989-755-0561(international & local) Email
Hours
M-F 7:00AM - 11:00PM EST

Rough Country 5075.1A Details

Rough Country Rear Double Cardan style CV Drive Shaft 5075.1A for the 1997-2006 4WD Jeep TJ Wrangler is recommended for Jeep TJ Wrangler models equipped with 4-6 inch suspension lifts to prevent driveline vibration and the rear output shaft from breaking.

Features

  • Collapsed Measurement: 14.25 inches
  • Extended Measurement: 17.75 inches
  • After lifting your Jeep TJ Wrangler a CV (Double Cardan) drive shaft is a good choice to eliminate vibration issues and provide the longest lasting drive shaft.
  • Includes better quality CV joints.
  • Shaft strength is twice as strong as the factory equipped drive shaft.
  • Grease fittings are out of the way of the transmission oil pan meaning you get grease to the joints that need it and not all over the bottom of your Jeep.
  • Running length: 16.5 inches.

Components

  • Extended CV drive shaft
  • Flanges/Yokes
  • Hardware

Installation/Fitment Notes

  • A Slip Yoke Eliminator is REQUIRED for installation and can be purchased here.
  • Fits Dana 35 rear axle models with automatic or manual transmission.
  • Fits Dana 44 rear axle models with automatic transmission.
  • Recommended on models with 4-6 inches of lift.
  • Due to inadequate length this driveshaft does NOT fit Rubicon or Unlimited models.
  • Does NOT fit 1997-2002 models with a 4-cylinder engine and 3-speed auto transmission. Please use 5074.1_A.
  • Does NOT fit 2005-2006 models with 2.4L a 4-cylinder engine and 6-speed manual transmission. Please use 5074.1_A.

Vehicle Application Guide for Rough Country 5075.1A

The RC5075.1A Rear CV Drive Shaft | Rough Country | Jeep TJ Wrangler is engineered to work with specific vehicles displayed below. Can't find your vehicle, or need assistance, please give us a call at 1-800-358-4751 or 1-989-755-0561.

YearMakeModelVehicle OptionInstallation Notes
2005 Jeep WranglerA Slip Yoke Eliminator is REQUIRED for installation. Fits Dana 35 rear axle models with automatic or manual transmission. Fits Dana 44 rear axle models with automatic transmission. Recommended on models with 4-6 inches of lift. Due to inadequate length this driveshaft does NOT fit Rubicon or Unlimited models. Does NOT fit 1997-2002 models with a 4-cylinder engine and 3-speed auto transmission. Please use 5074.1_A. Does NOT fit 2005-2006 models with 2.4L a 4-cylinder engine and 6-speed manual transmission. Please use 5074.1_A.
2004 Jeep WranglerA Slip Yoke Eliminator is REQUIRED for installation. Fits Dana 35 rear axle models with automatic or manual transmission. Fits Dana 44 rear axle models with automatic transmission. Recommended on models with 4-6 inches of lift. Due to inadequate length this driveshaft does NOT fit Rubicon or Unlimited models. Does NOT fit 1997-2002 models with a 4-cylinder engine and 3-speed auto transmission. Please use 5074.1_A. Does NOT fit 2005-2006 models with 2.4L a 4-cylinder engine and 6-speed manual transmission. Please use 5074.1_A.
2006 Jeep WranglerA Slip Yoke Eliminator is REQUIRED for installation. Fits Dana 35 rear axle models with automatic or manual transmission. Fits Dana 44 rear axle models with automatic transmission. Recommended on models with 4-6 inches of lift. Due to inadequate length this driveshaft does NOT fit Rubicon or Unlimited models. Does NOT fit 1997-2002 models with a 4-cylinder engine and 3-speed auto transmission. Please use 5074.1_A. Does NOT fit 2005-2006 models with 2.4L a 4-cylinder engine and 6-speed manual transmission. Please use 5074.1_A.
1998 Jeep WranglerA Slip Yoke Eliminator is REQUIRED for installation. Fits Dana 35 rear axle models with automatic or manual transmission. Fits Dana 44 rear axle models with automatic transmission. Recommended on models with 4-6 inches of lift. Due to inadequate length this driveshaft does NOT fit Rubicon or Unlimited models. Does NOT fit 1997-2002 models with a 4-cylinder engine and 3-speed auto transmission. Please use 5074.1_A. Does NOT fit 2005-2006 models with 2.4L a 4-cylinder engine and 6-speed manual transmission. Please use 5074.1_A.
1999 Jeep WranglerA Slip Yoke Eliminator is REQUIRED for installation. Fits Dana 35 rear axle models with automatic or manual transmission. Fits Dana 44 rear axle models with automatic transmission. Recommended on models with 4-6 inches of lift. Due to inadequate length this driveshaft does NOT fit Rubicon or Unlimited models. Does NOT fit 1997-2002 models with a 4-cylinder engine and 3-speed auto transmission. Please use 5074.1_A. Does NOT fit 2005-2006 models with 2.4L a 4-cylinder engine and 6-speed manual transmission. Please use 5074.1_A.
2000 Jeep WranglerA Slip Yoke Eliminator is REQUIRED for installation. Fits Dana 35 rear axle models with automatic or manual transmission. Fits Dana 44 rear axle models with automatic transmission. Recommended on models with 4-6 inches of lift. Due to inadequate length this driveshaft does NOT fit Rubicon or Unlimited models. Does NOT fit 1997-2002 models with a 4-cylinder engine and 3-speed auto transmission. Please use 5074.1_A. Does NOT fit 2005-2006 models with 2.4L a 4-cylinder engine and 6-speed manual transmission. Please use 5074.1_A.
2001 Jeep WranglerA Slip Yoke Eliminator is REQUIRED for installation. Fits Dana 35 rear axle models with automatic or manual transmission. Fits Dana 44 rear axle models with automatic transmission. Recommended on models with 4-6 inches of lift. Due to inadequate length this driveshaft does NOT fit Rubicon or Unlimited models. Does NOT fit 1997-2002 models with a 4-cylinder engine and 3-speed auto transmission. Please use 5074.1_A. Does NOT fit 2005-2006 models with 2.4L a 4-cylinder engine and 6-speed manual transmission. Please use 5074.1_A.
2003 Jeep WranglerA Slip Yoke Eliminator is REQUIRED for installation. Fits Dana 35 rear axle models with automatic or manual transmission. Fits Dana 44 rear axle models with automatic transmission. Recommended on models with 4-6 inches of lift. Due to inadequate length this driveshaft does NOT fit Rubicon or Unlimited models. Does NOT fit 1997-2002 models with a 4-cylinder engine and 3-speed auto transmission. Please use 5074.1_A. Does NOT fit 2005-2006 models with 2.4L a 4-cylinder engine and 6-speed manual transmission. Please use 5074.1_A.
1997 Jeep WranglerA Slip Yoke Eliminator is REQUIRED for installation. Fits Dana 35 rear axle models with automatic or manual transmission. Fits Dana 44 rear axle models with automatic transmission. Recommended on models with 4-6 inches of lift. Due to inadequate length this driveshaft does NOT fit Rubicon or Unlimited models. Does NOT fit 1997-2002 models with a 4-cylinder engine and 3-speed auto transmission. Please use 5074.1_A. Does NOT fit 2005-2006 models with 2.4L a 4-cylinder engine and 6-speed manual transmission. Please use 5074.1_A.
2002 Jeep WranglerA Slip Yoke Eliminator is REQUIRED for installation. Fits Dana 35 rear axle models with automatic or manual transmission. Fits Dana 44 rear axle models with automatic transmission. Recommended on models with 4-6 inches of lift. Due to inadequate length this driveshaft does NOT fit Rubicon or Unlimited models. Does NOT fit 1997-2002 models with a 4-cylinder engine and 3-speed auto transmission. Please use 5074.1_A. Does NOT fit 2005-2006 models with 2.4L a 4-cylinder engine and 6-speed manual transmission. Please use 5074.1_A.

Customer Q&A - Rough Country 5075.1A


Rough Country

Rough Country Warranty

Limited Lifetime Warranty

On hard suspension components including knuckles, Lift Blocks, Control Arms, Jeep JK Armor, Bed Covers, Bed Mats, Nerf Steps, and Wheel Well Liners.

5 Year Limited Warranty

On leaf springs and coil springs.

3 Year Limited Warranty

On shocks and stabilizers.

3 Year Limited Warranty

On LED Lights, Fender flares, and Soft Tops.

2 Year Limited Warranty

On Winch mechanical components.

1 Year Limited Warranty

On Winch electrical components.

1 Year Limited Warranty

On All wear and tear items. Bushings, Ball Joints, Etc.

Rough Country products are warranted to be free from defects in material and craftsmanship for the time periods listed. Some suspension components are prone to gradual wear and tear over time and therefore are not covered within the Lifetime Replacement Warranty.

Warranty Guard

This free protection supplements your manufacturer's warranty, guaranteeing that if you are denied repair due to having a Warranty Guard protected product on your vehicle, then Rough Country will foot the bill for your repair! For up to 5 years / 100K miles / or until your manufacturer's warranty ends, if there is a failure of a factory warranty-covered part due to installation of a Rough Country suspension product, Rough Country will cover the repairs at a factory authorized shop - all you pay is a $100 deductible!

What the warranty does not cover

Wear and tear items such as mountings, bushings, diminished shock and stabilizer dampening resistance, finish, dents and scratches, as these components and issues can wear out or occur naturally over time. These items are covered under a separate Limited Warranty along with other non-suspension items listed above. Replacements for non-defective items broken during off-road use may incur shipping charges.

You can view the full details of Rough Country’s warranty here.

How to get service

For warranty issues, contact Rough Country service at 1-800-222-7023.

Need Help Finding the Right Product?

Our Michigan Based Parts Experts Can Help. Call for immediate assistance.

Please Wait...