Shaft Repair Kit | SKF Speedi-Sleeve | 2.5030 Inch Shaft

SKU SK99250

$44.47
 
1 In Stock as of 11/30/2020 8:35:50 PM EST.

SKF Speedi-Sleeve thin wall shaft repair sleeve 99250 is designed to repair a worn shaft and ensure an ideal outer sealing surface every time.

Product Specs for SKF 99250

  • Application:The process of choosing a Speedi-Sleeve should never be left up to application alone. The area that needs to be repaired should be measured at three separate points and averaged to get the correct sizing for the repair sleeve. This is in accordance with the SKF Speedi-Sleeve instructions. The applications listed in the product notes are common usage cases and they can include repairs on manual transmissions, auto transmissions, differential pinions, and engine timing covers
  • Shaft:2.5030 inches
  • Flange Outer Diameter:2.8200 inches
  • Note:Manual transmission, auto transmission, differential pinion, engine timing cover repair sleeve
  • Manufacturers Part Number:99250
  • MPN: 99250
Ask an Expert

customer service Our Michigan based experts can help.

1.800.358.4751
Email
Hours
M-F 7:00AM - 11:00PM EST
Sat 8:00AM - 1:00PM EST

SKF 99250 Details

SKF Speedi-Sleeve thin wall shaft repair sleeves can take a worn shaft from scored to restored in less than 5 minutes. Speedi-Sleeve installation is possible without having to remove the shaft, and requires no change in seal size.

Unlike time-consuming shaft regrinding and refinishing techniques that can produce poor-quality sealing surfaces, Speedi-Sleeve installation ensures an ideal outer sealing surface every time.

  • Engineered from the finest AISI 304 stainless steel
  • Sizes covers shaft diameters from .5 inchesto 8 inches (12mm to 200mm)

Customer Q&A - SKF 99250


2004 e350 superduty ford rear axel outer bearing repair?

Asked
These repair kits are purchased by measurement only. Feel free to call us at 1-800-358-4751 if you have any additional questions.


My 1958 Ford Thunderbird rear axles have corrosion damage at the area where the seal rides, so causing leaks. Do you have a repair sleeve for these? The measurement of the axle must be taken with which accuracy? Only in inches, or could be in mm?

Asked
The Speedi-Sleeve repair kits are sold by measurement. We are unable to look them up by application or axle number. The measurement should be taken with a set of dial calipers and should be accurate to at least 2 decimal places. 00.00". We could convert a measurement in millimeters to find the correct sizing. To determine the appropriate sleeve size, it is first necessary to clean the damaged shaft that needs repair. The diameter of an undamaged section of the seal counterface (sealing surface) should then be measured on at least three different locations. The average of these measurements determines the size of SKF Speedi-Sleeve. T


WILL YOUR 99250 SPEEDI SLEEVE FIT A 2005 F550

Asked
These repair kits are purchased by measurement. They do list common applications for use but the surface to be repaired needs an accurate measurement to ensure the correct item is ordered. Feel free to call us at 1-800-358-4751 if you have any additional questions.


1996 F350 4x4 Single rear wheel. Rear axle seal leak, please explain the process of measurement for a speedi sleeve.

Asked
To determine the appropriate sleeve size, it is first necessary to clean the damaged shaft that needs repair. The diameter of an undamaged section of the seal counterface (sealing surface) should then be measured on at least three different locations. The average of these measurements determines the size of SKF Speedi-Sleeve. If the value lies within the permissible range listed in the product table for the shaft diameter, SKF Speedi-Sleeve will have an adequate tight fit on the shaft and will not require an adhesive. If no suitable size is listed in the product table, it will be necessary to rework the shaft to an appropriate dimension. This also means that a new seal size will be required.


will this fit a 2002 dodge ram 3500 axle where the rear wheel seal rides?

Asked
These repair kits are purchased by measurement. Feel free to contact us at 1-800-358-4751 if you have any questions or need assistance.


Do you offer a repair sleeve for a 2008 chevy silverado 3500 rear axle shaft, for the wheel seal

Asked
These repair kits are purchased by measurement. They do list common applications for use but the surface to be repaired needs an accurate measurement to ensure the correct item is ordered.


do you use the same bearing (stock)after you install the Speedi Sleeve

Asked
The Speedi Sleeve is designed to repair a surface that a seal rides on. A bearing with an interference fit may crush the sleeves when installed. Feel free to call us at 1-800-358-4751 if you have any questions.


1998 dodge ram 3500 dully dana 80 differencal axle shaft wheel end under seal ?

Asked
These shaft repair sleeves are listed and sold by measurements. They do not have a listing by vehicle application. Accurately measuring the shaft that has been damaged is important in ordering these sleeves to ensure that it will be a lasting repair. If you have any questions about measuring or need any assistance, feel free to call us at 1-800-358-4751.


SKF

SKF is a leading manufacturer of seals for the transportation industry and offers a wide variety of seal for cars, trucks and buses. They have been a leader in automotive parts since 1907. As a specialist in both bearings and seals, SKF is able to combine these products and their functions in high-performance units, providing a unique advantage. SKF supplies seals to OEM’s globally from their manufacturing sites throughout North America, Europe and Asia.

SKF has experience in more than the automotive industry. They currently service over 40 industries and can provide their knowledge and technology throughout the company.

SKF Warranty

1 Year Warranty

SKF offers a 1 year warranty on all products. SKF warrants to the first purchaser that the products sold by it, when properly installed, will be free from defects in material and workmanship.

What the warranty does not cover

Normal wear and tear, accident, abuse, misapplication, improper or faulty repair or installation, improper or faulty maintenance or lubrication, any alteration or neglect, excessive loading or other excessive operating conditions, or for defects caused by or resulting from purchaser’s specifications or designs or otherwise caused by purchaser.

How to get service

Contact SKF Customer Service Department at 1-800-882-0008 for any warranty claims.

Need Help Finding the Right Product?

Our Michigan Based Parts Experts Can Help. Call for immediate assistance.

Please Wait...