+1-989-755-0561 1-800-358-4751
Trustpilot

Flexiride Trailer Axle Parts

Found 45 Matching Products
Filter the list of Matching Products by selecting any of these options:
  1. Base Plates
  2. Bearing Kit
  3. Brake Drum
  4. Cotter Pins
  1. Grease Caps
  2. Idler Hubs
  3. Nuts / Bolts
  4. Rubber Plug
  1. Spindles
  2. Trailer Brakes
  3. Washer
  1. UCF
  1. Multiple Heavy Duty Manufacturers
  1. Automann
  1. 1,000 lbs.
  2. 1,250 lbs.
  1. 1,750 lbs.
  2. 2,000 lbs.
  1. 3,000 lbs.
  2. 3,500 lbs.
  1. 5,200-7,000 lbs.
  1. 425 lbs.
  2. 550 lbs. and 935 lbs.
  1. 1,400 lbs. and 2,000 lbs.
  2. 2,000 lbs
  1. 3,500 lbs
  2. 3,500 lbs.
  1. 7,000 lbs
  1. 1/2 inch
  1. 7 inches
  1. 10 inches
  1. 12 inches
  1. Left
  1. Left/Right
  1. Right
  1. Electric
  1. 7 x 1-1/4 inches
  1. 10 x 2-1/4 inches
  1. 12 x 2 inches
  1. No
  1. 4
  1. 5
  1. 6
  1. 8
  1. Yes
Grid List
v
SKU FS30-6
$13.90
FlexiRide Base Plate | 1,400 lbs., 2,000 lbs. Half Axles

FlexiRide Base Plate FS30-6 is designed to be welded onto an existing trailer frame to insure proper...   Details

6 In Stock
  • Axle Capacity:1,400 lbs. and 2,000 lbs.
  • Dimensions: FS30-6 dimension diagram.
  • Note:Plates are sold individually, but should be configured in pairs.
  • MPN: FS30-6
SKU FA-35P-LUBE
$54.10
Machined Spindle Arm | 3,500 lbs. Flexiride Torsion Axle | Lube

Flexiride Spindle with arm FA-35P LUBE fits 3,500 lb Flexiride full or half shaft torsion axles.   Details

3 In Stock
  • Axle Capacity:3,500 lbs
  • Inner Bearing - Race1-3/8 inch L68149/L68111
  • Outer Bearing - Race1-1/16 inch L44649/L44610
  • MPN: FA-35P LUBE
SKU FA-70/52LH-LUBE
$94.18
Machined Spindle Arm | 7,000 lbs. Flexiride Torsion Axle | Left Hand, Lube

Flexiride Spindle with arm FA-70/52LH-LUBE fits 7,000 lbs.   Details

3 In Stock
  • Axle Capacity:7,000 lbs
  • Inner Bearing - Race1-3/4 inch 25580/25520
  • Outer Bearing - Race1-1/4 inch LM67048/LM67010 or 15123/15245 or 14215A/14276 (dependent on hub)
  • MPN: FA-70/52LH-LUBE
SKU FA-20P-LUBE
$47.52
Machined Spindle Arm | 2,000 lbs. Flexiride Torsion Axle | Lube

Flexiride Spindle with arm FA-20P-LUBE fits 2,000 lb Flexiride full or half shaft torsion axles.   Details

8 In Stock
  • Axle Capacity:2,000 lbs
  • Inner Bearing - RaceL44649
  • Outer Bearing - RaceL44610
  • MPN: FA-20P LUBE
SKU FHP-35
$30.87
FlexiRide Base Plate | 3,500 lbs. Half Axles

FlexiRide Base Plate FHP-35 is designed to be welded onto an existing trailer frame to insure proper...   Details

8 In Stock
  • Axle Capacity:3,500 lbs.
  • Dimensions: FHP-35 dimension diagram.
  • Note:Plates are sold individually, but should be configured in pairs.
  • MPN: FHP-35
SKU FA-70/52RH-LUBE
$94.18
Machined Spindle Arm | 7,000 lbs. Flexiride Torsion Axle | Right Hand, Lube

Flexiride Spindle with arm FA-70/52RH-LUBE fits 7,000 lbs.   Details

3 In Stock
  • Axle Capacity:7,000 lbs
  • Inner Bearing - Race1-3/4 inch 25580/25520
  • Outer Bearing - Race1-1/4 inch LM67048/LM67010 or 15123/15245 or 14215A/14276 (dependent on hub)
  • MPN: FA-70/52RH-LUBE
SKU FS1-2A
$37.15
Idler Hub | 5 X 4.5 Inch | 6.5 inch Flange | 1,250 lbs. Capacity

Flexiride 5 X 4.5 Inch Idler Hub with 6.   Details

10 In Stock
  • Number of Bolts:5
  • Bolt Length:4.5 inches
  • Flange Outer Diameter:6.5 inches
  • Capacity:1,250 lbs.
  • Spindle Number:BT-8
  • Spindle Size:1 - 1 inch
  • Bolt Hole Pattern:5 on 4.5 inch
  • Bolt Diameter:1/2 inch
  • Grease Cap Size:1.98
  • Bearing Inner Cup:L44610
  • Bearing Outer:L44610
  • Dexter Number:8-258-05
  • MPN: FS1-2A
SKU FS30-3
$18.60
FlexiRide Base Plate | 550 lbs., 935 lbs. Half Axles

FlexiRide Base Plate FS30-3 is designed to be welded onto an existing trailer frame to insure proper...   Details

17 In Stock
  • Axle Capacity:550 lbs. and 935 lbs.
  • Dimensions: FS30-3 dimension diagram.
  • Note:Plates are sold individually, but should be configured in pairs.
  • MPN: FS30-3
SKU M80230
$3.34
Tower Plug | Chalmers

Tower plug for Chalmers 800, 1023, 1030 and 1040 suspensions. Used on M80302 tower.   Details

2 In Stock
  • Chalmers Number:800230
  • Eaton Number:8951K1048
  • UPC: 889626369711
  • MPN: M80230
SKU 13-175-125A
$31.76
Bearing Kit | 1-3/4 Inch - 1-1/4 Inch Spindle Diameter

Trailer bearing and seal kit 13-175-125A for a 1-3/4 to 1-1/4 inch spindle diameter.   Details

1 In Stock
  • MPN: 13-175-125A
SKU BD-105450
$83.38
Hub and Drum | Flexiride | 5 x 4.5 Inch | 10 Inch Brake

5 x 4.5 inch Hub and Drum, 10 inch brake for Flexiride suspensions.   Details

Typically ships in 3 to 4 business days.
  • Diameter:10 inches
  • Number of Bolts:5
  • Bolt Length:4.5 inches
  • Bolt Diameter:1/2 inch
  • Grease Cap Size:1.98 inches
  • Dexter Number:8-247-05
  • Manufacturers Part Number:BD-105450
  • MPN: BD-105450
SKU BD-126550 HD
$124.98
Hub and Drum | Flexiride | 6 x 5.5 Inch | 12 Inch Brake

6 x 5.5 inch Hub and Drum, 12 inch brake for Flexiride suspensions.Outer Cup 15245, not LM-67010.   Details

Typically ships in 3 to 4 business days.
  • Diameter:12 inches
  • Number of Bolts:6
  • Bolt Length:5.5 inches
  • Bolt Diameter:1/2 inch
  • Dexter Number:8-201-09
  • Manufacturers Part Number:BD-126550 HD
  • MPN: BD-126550 HD

Flexiride Trailer Axle Parts Reviews

The average customer rating for Flexiride Trailer Axle Parts: 5 out of 5.

1 Review.

flexiride base plate for 3,500 lbs. half axles fhp-35 reviewer
Flexiride Trailer Axle Parts - UCF FHP-35 Rating: 5 Stars

Excellent Fit

This part is a must when using the 3500# torsion axles . Frame should be 4" or less , to allow for bolts .

Read the Review

Customers Who Purchased Flexiride Trailer Axle Parts Also Viewed

Flexiride Torsion Half Axles View Details
Flexiride Torsion Half Axles

Need Help Finding the Right Product?

Our Michigan Based Parts Experts Can Help. Call for immediate assistance.

Please Wait...